Cubby House Fabworks
Bilstein platinum lift kit hilux n70 n80
Bilstein platinum lift kit hilux n70 n80
Couldn't load pickup availability
Full front + rear Platinum lift kit. Use the two calculators below to get a guide on your front spring rate and rear spring load option — both attach to your order automatically.
Stock with no front accessories runs a 600lb spring. Tick what's fitted up front to get a guide on where you'll land.
| Front accessory | |
|---|---|
| Bull bar (steel or alloy) | |
| Winch | |
| Rock sliders | |
| Bash/skid plates | |
| Extra/dual battery (engine bay) |
| Spring rate | Typical setup |
|---|---|
| 600lb | Stock, no front accessories |
| 650lb | Bull bar only |
| 700lb | Bull bar + winch |
| 750lb | Bull bar + winch + rock sliders + bash plates |
| 800lb | Heavier ute overall |
Tick everything that's fitted (or planned) on the back of your ute.
| Rear accessory | Avg weight | |
|---|---|---|
| Aluminium tray | 90kg | |
| Steel tray | 150kg | |
| Aluminium canopy | 70kg | |
| Steel canopy | 120kg | |
| Drawer system | 40kg | |
| Dual battery setup | 25kg | |
| Water tank (full, ~80L) | 80kg | |
| Aux fuel tank (full, ~60L) | 55kg | |
| Spare tyre (extra/mounted) | 25kg | |
| Tool boxes | 20kg | |
| General camping/touring gear | 100kg |
| Rear Spring Load Option | Added weight range |
|---|---|
| Light | 0 – 80kg |
| Medium | 80 – 180kg |
| Heavy | 180 – 280kg |
| Extra Heavy | 280kg+ |
We only run 2in and 3in lifts. 4in is not something we'll do — it ruins ride quality on these utes for no real benefit, so please don't ask.
* Guide only. This gets attached to your order automatically so we see it when you check out — we'll confirm exact spring rates before building.
Ordering reference (CoolDrive): Front strut 24-218528 · Rear shock 24-228602. Unlike Ranger/LandCruiser, Hilux coils aren't sold as a separate SKU by weight rating — CalOffroad assembles the strut and matched coil locally per order, so the spring rate above is specified directly with the supplier against the strut SKU, not looked up as its own part number.
Please contact me regarding vehicle weights before ordering — this is critical to get your ute driving as well as possible, set at the height you want, and avoid front-end sag.
When it comes to off-road vehicles, the Bilstein B6 Offroad gas-pressure shock absorber is the ideal suspension solution. Developed to meet the demanding requirements of Australian 4WDs, the Bilstein B6 addresses the handling dynamics that are often challenging in high-riding vehicles.
With over 50 years of development, the Bilstein B6 incorporates advanced gas pressure technology, ensuring consistent performance in all conditions. It features a 46mm piston in a mono-tube configuration, providing enhanced performance reserves and extended service life — even during demanding activities like towing or off-roading. Expect superior road adhesion, improved lane-change stability, and precise damper settings that excel both on the highway and on the rough stuff.
Bilstein has conducted extensive testing and fine-tuning to optimise handling performance. These shock absorbers offer increased load-carrying capacity and enhanced vehicle control across all driving conditions, from bitumen to off-road trails.
Please note: this is a made-to-order full kit and isn't held in stock — please allow a 2 week lead time.
