Cubby House Fabworks
Fox 2.0 Performance Series Shock Kit (Front + Rear) — Hilux N70/N80
Fox 2.0 Performance Series Shock Kit (Front + Rear) — Hilux N70/N80
Couldn't load pickup availability
Front + rear Fox 2.0 Performance Series shocks only — this listing does not include leaf springs. If you need leaf springs too, grab them separately or ask about our combined shocks + leaves package. Use the two calculators below to get a guide on your front spring rate and rear spring load option — both attach to your order automatically.
Stock with no front accessories runs a 600lb spring. Tick what's fitted up front to get a guide on where you'll land.
| Front accessory | |
|---|---|
| Bull bar (steel or alloy) | |
| Winch | |
| Rock sliders | |
| Bash/skid plates | |
| Extra/dual battery (engine bay) |
| Spring rate | Typical setup |
|---|---|
| 600lb | Stock, no front accessories |
| 650lb | Bull bar only |
| 700lb | Bull bar + winch |
| 750lb | Bull bar + winch + rock sliders + bash plates |
| 800lb | Heavier ute overall |
Tick everything that's fitted (or planned) on the back of your ute.
| Rear accessory | Avg weight | |
|---|---|---|
| Aluminium tray | 90kg | |
| Steel tray | 150kg | |
| Aluminium canopy | 70kg | |
| Steel canopy | 120kg | |
| Drawer system | 40kg | |
| Dual battery setup | 25kg | |
| Water tank (full, ~80L) | 80kg | |
| Aux fuel tank (full, ~60L) | 55kg | |
| Spare tyre (extra/mounted) | 25kg | |
| Tool boxes | 20kg | |
| General camping/touring gear | 100kg |
| Rear Spring Load Option | Added weight range |
|---|---|
| Light | 0 – 80kg |
| Medium | 80 – 180kg |
| Heavy | 180 – 280kg |
| Extra Heavy | 280kg+ |
We only run 2in and 3in lifts. 4in is not something we'll do — it ruins ride quality on these utes for no real benefit, so please don't ask.
* Guide only. This gets attached to your order automatically so we see it when you check out — we'll confirm exact spring rates before building.
Ordering reference (CoolDrive): Front coilover (assembled with matched coil, sold each — 2 required) CO024-xx-xI, e.g. CO024-LI-2I · Rear shock (sold each — 2 required) 985-24-075. Exact front coilover code depends on the spring rate/duty and lift height confirmed with you before we order.
Please contact me regarding vehicle weights before ordering — this is critical to get your ute driving as well as possible, set at the height you want, and avoid front-end sag.
The Fox 2.0 Performance Series IFP shock uses race-proven internal floating piston (IFP) damping for a comfortable on-road ride and predictable off-road handling. The precision impact-aluminium body increases cooling capacity and won't rust. The front coilovers are CalOffroad Fox 2.0 units pre-assembled with matched Platinum Series tapered wire coil springs.
This kit covers shocks (front coilovers + rear shocks) only — it does not include rear leaf springs. If your leaf packs need replacing too, add our N70/N80 Rear Leaf Springs separately, or ask about the combined shocks + leaves package.
Fox has decades of motorsport and off-road racing heritage behind every shock, translating directly into a smoother, more controlled ride whether you're commuting or out on the trails.
Please note: this is a made-to-order full kit and isn't held in stock — please allow a 2 week lead time.
Shipping: $80 shipping is automatically calculated at checkout for this kit.
